My Store
Upgrade Surge Protection Jumper Cable Clamps for Milwaukee M18 18V Battery
Upgrade Surge Protection Jumper Cable Clamps for Milwaukee M18 18V Battery
Regular price
$92.99 USD
Regular price
$138.99 USD
Sale price
$92.99 USD
Unit price
per
Couldn't load pickup availability
Product Description
About this product
- Safer: Compared with ordinary Jumper cable clamps, Our jumper cables have been upgraded and added with a switch circuit breaker, Which is not only compatible with all Milwaukee batteries to solve the problem of car battery dying and leaving you stranded but also safer and efficient, Which can block excessive current from damaging your car.
- Surge Protection: Switched waterproof circuit breaker to eliminate ripple voltage (along with associated voltage drops and speed reductions), Effectively preventing overcurrent or battery short circuits, Has a switch to prevent excessive current, If there is an excessive current, It will automatically disconnect to protect your car, This ensures safe use during emergencies.
- High Quality: The adapter part is made of pure copper, Which greatly improves conductivity and safety. The cables are covered with fire-resistant silicone rubber insulation, and the clamps are made with fully insulated materials to prevent sparking and ensure long-lasting performance in any situation.
- Easy to Carry: Its compact and lightweight design makes it easy to carry around. It is ideal for trucks, SUVs, Full-size cars, Mid-size cars, and small/compact cars. Notes: The battery charge should ideally be above 50%. If the first ignition fails, Wait a few minutes before attempting to ignite again. If the ignition is successful, Remove the cables within 30 seconds.
- Instructions: 1. Connect the red battery clip of the jumper cable to the positive pole (+) of the vehicle and the black to the negative pole (-); 2. Insert the battery into the adapter and ensure it is securely locked; 3. Start the car and disassemble the Lower clamp. Pay attention please NOT reverse the operation sequence of the jump starter. Wire: 8-AWG, The applicable range is 12-24v voltage. Perfect for most motorcycles, Cars, and SUVs
